diff options
Diffstat (limited to 'Completion/Unix/Command/_ip')
| -rw-r--r-- | Completion/Unix/Command/_ip | 577 |
1 files changed, 0 insertions, 577 deletions
diff --git a/Completion/Unix/Command/_ip b/Completion/Unix/Command/_ip deleted file mode 100644 index 9a7cbd821..000000000 --- a/Completion/Unix/Command/_ip +++ /dev/null @@ -1,577 +0,0 @@ -#compdef ip - -# This is based on iproute2-ss061214. -# The manual and help text summaries are not consistent with the main -# manual text. I have based this on the main manual text, except where -# it's obviously deficient. - -# -# Values encoding simple types -# -local -a subcmd_dev net_intf_disp net_intf_list -# subcmd_dev=(/$'[[:alnum:][:punct:][:cntrl:][:digit:]]##\0'/ ':interfaces:network interface:_net_interfaces') -_find_net_interfaces -subcmd_dev=(/"(${(j.|.)net_intf_list})"$'\0'/ - ':interfaces:network interface:_net_interfaces') - -local -a subcmd_onoff -subcmd_onoff=(/$'(on|off)\0'/ ':onoff:state (on or off):(on off)') - -local -a subcmd_string -subcmd_string=(/$'[^\0]#\0'/ ':string:arbitrary string:( )') - -local -a subcmd_number -subcmd_number=(/$'[0-9]##\0'/ ':number:decimal number:( )') - -local xp='[[:xdigit:]][[:xdigit:]]' -local -a subcmd_lladdr -subcmd_lladdr=(/"${xp}:${xp}:${xp}:${xp}:${xp}:${xp}"$'\0'/ -':lladdress:link layer (MAC) address:( )') - -local -a subcmd_ipaddr -subcmd_ipaddr=( - /$'(<->(.<->(.<->(.<->|)|)|)|[:[:xdigit]]#:[:[:xdigit:]]#)(|/<->)\0'/ - ':ipaddress:IP address (v4 or v6) with optional /<network-prefix-length>:( )' -) - -local -a subcmd_ipaddrs -local PATH=$PATH -PATH=/sbin:$PATH -subcmd_ipaddrs=( - /$'(<->(.<->(.<->(.<->|)|)|)|[:[:xdigit]]#:[:[:xdigit:]]#)(|/<->)\0'/ - ":ipaddress:IP address (v4 or v6) currently set:( $(ip addr show | sed -n 's/^ *inet6* \([0-9a-f\.:/]*\) .*$/\1/p') )" -) -local -a subcmd_prefix_label -subcmd_prefix_label=( - /$'(<->(.<->(.<->(.<->|)|)|)|[:[:xdigit]]#:[:[:xdigit:]]#)(|/<->)\0'/ - ":ipaddresslabel:IP addrlabel prefix currently set:( $(ip -6 addrlabel list 2>/dev/null | sed -n 's/^prefix \([0-9a-f\.:/]*\) .*$/\1/p') )" -) - - -local -a subcmd_scope -_regex_words scope "IP address scope" \ - 'global:address globally valid' \ - 'site:address valid for site (IPv6)' \ - 'link:address valid for single link' \ - 'host:address valid for this host' -subcmd_scope=("$reply[@]") - -local -a subcmd_nud -_regex_words nud "Neighbour Unreachability Detection state" \ - 'permanent:valid forever' \ - 'noarp:valid, not validated, removed if expired' \ - 'reachable:valid until reachability timeout' \ - 'stale:valid but suspicious' -subcmd_nud=("$reply[@]") - -local -a subcmd_rttype -_regex_words route-type "Route type" \ - 'unicast:real point-to-point route' \ - 'unreachable:generate Host Unreachable messages' \ - 'blackhole:silently discard' \ - 'prohibit:generate Communication Administratively Prohibited messages' \ - 'local:Loopback route' \ - 'broadcast:destinations are broadcast addresses' \ - 'throw:used with policy rules, generate Net Unreachable if no route' \ - 'nat:Network Address Translation route' \ - 'anycast:anycast addresses, not implemented' \ - 'multicast:multicast routing, not present in normal tables' -subcmd_rttype=("$reply[@]") - -local -a subcmd_route -# Route type is optional in route. -# There's an overall default but then the whole thing is missed -# out, and it's marked as optional anyway. -subcmd_route=("(" $subcmd_rttype "|" ")" $subcmd_ipaddr) - -local -a subcmd_tos -_regex_words tos "type of service" \ - 'lowdelay:low latency' \ - 'throughput:high bulk throughput' \ - 'reliability:high reliability' -subcmd_tos=("(" "$reply[@]" "|" - /$'(|0x)[[:xdigit:]]##\0'/ ":hex-number:8-bit hex number:( )" ")") - -local -a subcmd_lockmtu -subcmd_lockmtu=("(" /$'lock\0'/ ":lock:lock:(lock)" "|" ")" $subcmd_number ) - -local -a subcmd_nexthop -_regex_words nexthop 'nexthop route keyword' \ - 'via:specify nexthop router:$subcmd_ipaddr' \ - 'dev:specify output device:$subcmd_dev' \ - 'weight:specify relative quality of route:$subcmd_number' -subcmd_nexthop=("$reply[@]" "#") - -local -a subcmd_rtprotocol -_regex_words rtprotocol 'route protocol' \ - 'redirect:installed from ICMP redirect' \ - 'kernel:installed automatically by kernel' \ - 'boot:installed during boot sequence' \ - 'static:installed by administrator' \ - 'ra:installed by Router Discovery protocol' -subcmd_rtprotocol=("$reply[@]") - -local -a subcmd_rttable -_regex_words rttable 'routing table' \ - 'local:local routes' \ - 'main:main routing table' \ - 'default:default routing table' \ - 'unspec:unspecified routing table' -subcmd_rttable=("(" "$reply[@]" "|" $subcmd_number ")") - -local -a subcmd_rtrealm subcmd_rtrealms -_regex_words -t / rtrealm 'routing realm' \ - 'cosmos:everywhere' -subcmd_rtrealms=("(" "$reply[@]" "|" /$'[0-9]##/'/ - ':number:decimal number:( )' ")") - -_regex_words rtrealm 'routing realm' \ - 'cosmos:everywhere' -subcmd_rtrealm=("(" "$reply[@]" "|" $subcmd_number ")") -subcmd_rtrealms+=($subcmd_rtrealm) - -local -a subcmd_rtselector -_regex_words rtselmod 'routing selector modifier' \ - 'root:select minimum route prefix length to match' \ - 'match:select maximum route prefix length to match' \ - 'exact:select exact prefix length to match' -subcmd_rtselector=("(" "$reply[@]" "|" ")" $subcmd_ipaddr) - -local -a subcmd_family -_regex_words family 'protocol family' \ - 'inet:IPv4' \ - 'inet6:IPv6' \ - 'link:local, no networking protocol' -subcmd_family=("$reply[@]") - -local -a subcmd_ruletypes -_regex_words ruletype 'rule type' \ - 'unicast:rule applies to a route' \ - 'blackhole:rule silently drops packet' \ - 'unreachable:rule generates Network Unreachable messages' \ - 'prohibit:rule generates Communication Administratively Prohibited messages' \ - 'nat:rule prescribes translation of source IP address' -subcmd_ruletypes=("$reply[@]") - -local -a subcmd_tunnelmode -_regex_words tunnelmode 'tunnel mode' \ - 'ipip:IPv4 in IPv4 tunnel' \ - 'sit:Simple Internet Transition - IPv6 in IPv4 tunnel' \ - 'gre:Generic Route Encapsulation - IPv4/IPv6 in IPv4 tunnel' -subcmd_tunnelmode=("$reply[@]") - -local -a subcmd_files -subcmd_files=(/$'[^\0]##\0'/ ':file:file name:_files') - - -# -# The ip top-level commands. First link -# -local -a link_set_cmds -_regex_words \ - link-set-commands 'link set commands' \ - 'dev:specify device:$subcmd_dev' \ - 'u*p:change state to up' \ - 'do*wn:change state to down' \ - 'ar*p:change ARP flag on device:$subcmd_onoff' \ - 'mu*lticast:change MULTICAST flag on device:$subcmd_onoff' \ - 'pr*omisc:set promiscuous mode:$subcmd_onoff' \ - 'dy*namic:change DYNAMIC flag on device:$subcmd_onoff' \ - 'n*ame:change name of device:$subcmd_string' \ - 'txq*ueuelen:specify length of transmit queue:$subcmd_number' \ - 'txql*en:specify length of transmit queue:$subcmd_number' \ - 'm*tu:specify maximum transmit unit:$subcmd_number' \ - 'ad*dress:specify unicast link layer (MAC) address:$subcmd_lladdr' \ - 'br*oadcast:specify broadcast link layer (MAC) address:$subcmd_lladdr' \ - 'brd:specify broadcast link layer (MAC) address:$subcmd_lladdr' \ - 'p*eer:specify peer link layer (MAC) address:$subcmd_lladdr' -# can complete interface with no dev, subcommands can repeat... -link_set_cmds=("(" $subcmd_dev "|" ")" "$reply[@]" "#" ) - -local -a link_show_cmds -_regex_words link-show-commands 'link show commands' \ - 'dev:specify device:$subcmd_dev' \ - 'up:limit display to running devices' -link_show_cmds=("(" $subcmd_dev "|" ")" "$reply[@]" "#" ) - -local -a link_cmds -_regex_words \ - link-commands "link command" \ - 'h*elp:show help for command' \ - 'se*t:change device attributes:$link_set_cmds' \ - 'sh*ow:display device attributes:$link_show_cmds' -link_cmds=("$reply[@]") - - -# -# addr -# -local -a addr_add_cmds -# TODO: broadcast can take + or = -_regex_words addr-add-commands "addr add/remove/change/replace commands" \ - 'dev:specify device:$subcmd_dev' \ - 'lo*cal:specify local IP address:$subcmd_ipaddr' \ - 'p*eer:specify peer IP address (point-to-point):$subcmd_ipaddr' \ - 'b*roadcast:specify broadcast IP address:$subcmd_ipaddr' \ - 'la*bel:specify tag for device:$subcmd_string' \ - 's*cope:specify scope for address:$subcmd_scope' -# can complete IP address with no keyword -addr_add_cmds=("(" $subcmd_ipaddr "|" ")" "$reply[@]" "#" ) - -local -a addr_del_cmds -addr_del_cmds=("(" $subcmd_ipaddrs "|" "$reply[@]" ")" "#" ) - -local -a addr_show_cmds -# TODO: broadcast can take + or = -_regex_words addr-show-commands "addr show commands" \ - 'dev:specify device:$subcmd_dev' \ - 's*cope:specify scope for address:$subcmd_scope' \ - 't*o:limit to given IP address/prefix:$subcmd_ipaddr' \ - 'la*bel:list tags matching glob patter:$subcmd_string' \ - 'dynamic:list addresses from stateless configuration (IPv6)' \ - 'permanent:list non-dynamic addresses (IPv6)' \ - 'tentative:list addresses failing duplicate address detection (IPv6)' \ - 'deprecated:list deprecated addresses (IPv6)' \ - 'primary:list only primary addresses' \ - 'secondary:list only secondary addresses' -# can complete device with no keyword -addr_show_cmds=("(" $subcmd_dev "|" ")" "$reply[@]" "#" ) - -local -a addr_cmds -_regex_words \ - addr-commands "addr command" \ - 'h*elp:show help for command' \ - 'a*dd:add new protocol address:$addr_add_cmds' \ - 'c*hange:change existing protocol address:$addr_add_cmds' \ - 'r*eplace:add or update protocol address:$addr_add_cmds' \ - 'd*elete:delete protocol address:$addr_del_cmds' \ - 's*how:show protocol address:$addr_show_cmds' \ - 'f*lush:flush protocol address:$addr_show_cmds' -addr_cmds=("$reply[@]") - -# -# addrlabel -# - -local -a addrlabel_add_cmds -_regex_words addrlabel-add-commands "addlabel add command" \ - 'p*refix: limit to given IP address/prefix' \ - 'd*ev: specify device:$subcmd_dev' \ - 'l*abel: number' -addrlabel_add_cmds=( "(" $subcmd_ipaddr "|" ")" "$reply[@]" "#") - -local -a addrlabel_del_cmds -_regex_words addrlabel-add-commands "addlabel del command" \ - 'p*refix: limit to given IP address/prefix:$subcmd_prefix_label' \ - 'd*ev: specify device:$subcmd_dev' \ - 'l*abel: number:$subcmd_number' -addrlabel_del_cmds=( "(" $subcmd_ipaddr "|" ")" "$reply[@]" "#") - - -local -a addrlabel_cmds -_regex_words \ - addrlabel-commands "addrlabel command" \ - 'h*elp: show help for command' \ - 'a*dd: add an address labels:$addrlabel_add_cmds' \ - 'd*el: delete an address labels:$addrlabel_del_cmds' \ - 'l*ist: list address labels' \ - 'f*lush: flush adderss labels' -addrlabel_cmds=("$reply[@]") - -# -# neigh -# -local -a neigh_add_cmds -_regex_words neigh-add-commands "neighbour add command" \ - 't*o:add new neighbour IP address:$subcmd_ipaddr' \ - 'dev:specify network device:$subcmd_dev' \ - 'l*laddr:specify link layer (MAC) address or null:$subcmd_lladdr' \ - 'n*ud:specify neighbour unreachability detection state:$subcmd_nud' -# to-address without keyword can appear first -neigh_add_cmds=( "(" $subcmd_ipaddr "|" ")" "$reply[@]" "#") - -local -a neigh_del_cmds -_regex_words neigh-add-commands "neighbour delete command" \ - 't*o:remove neighbour IP address:$subcmd_ipaddr' \ - 'dev:specify network device:$subcmd_dev' -neigh_del_cmds=( "(" $subcmd_ipaddr "|" ")" "$reply[@]" "#") - -local -a neigh_show_cmds -_regex_words neigh-show-commands "neighbour show command" \ - 't*o:select neighbours by prefix:$subcmd_ipaddr' \ - 'dev:select neighbours by device:$subcmd_dev' \ - 'u*nused:only list unused neighbours' \ - 'n*ud:only list neighbours in given state:$subcmd_nud' -neigh_show_cmds=( "(" $subcmd_ipaddr "|" ")" "$reply[@]" "#" ) - -local -a neigh_cmds -_regex_words \ - neigh-commands "neigh command" \ - 'h*elp:show help for command' \ - 'a*dd:add new neighbour entry:$neigh_add_cmds' \ - 'c*hange:change existing neighbour entry:$neigh_add_cmds' \ - 'r*eplace:add or change neighbour entry:$neigh_add_cmds' \ - 'd*elete:delete neighbour entry:$neigh_del_cmds' \ - 's*how:list neighbour entries:$neigh_show_cmds' \ - 'f*lush:flush neighbour entries:$neigh_show_cmds' -neigh_cmds=("$reply[@]") - - -# -# route -# -local -a route_add_cmds -_regex_words route-add-commands "route add/change/replace command" \ - 'to:route destination prefix:$subcmd_route' \ - 'tos:type of service:$subcmd_tos' \ - 'ds*field:type of service:$subcmd_tos' \ - 'me*tric:preference value of route:$subcmd_number' \ - 'pre*ference:preference value of route:$subcmd_number' \ - 'ta*ble:select table by ID:$subcmd_rttable' \ - 'dev:select device:$subcmd_dev' \ - 'v*ia:select nexthop router:$subcmd_ipaddr' \ - 'sr*c:select preferred source address:$subcmd_ipaddr' \ - 're*alm:select routing realm:$subcmd_rtrealm' \ - 'mtu:select maximum transport unit:$subcmd_lockmtu' \ - 'w*indow:select maximal window in bytes:$subcmd_number' \ - 'rtt:select round trip time estimate:$subcmd_number' \ - 'rttv*ar:select initial round trip variance estimate:$subcmd_number' \ - 'ss*thresh:select initial slow start threshold estimate:$subcmd_number' \ - 'cw*nd:select clamp for congestion window (only if locked):$subcmd_number' \ - 'in*itcwnd:select max initial cwnd in MSS:$subcmd_number' \ - 'ad*vmss:select maximal segment size advertised:$subcmd_number' \ - 're*ordering:select maximal reordering for path:$subcmd_number' \ - 'ne*xthop:select nexthop of multipath route:$subcmd_nexthop' \ - 'sc*ope:select scope of destinations:$subcmd_scope' \ - 'pro*tocol:select routing protocol identifier:$subcmd_rtprotocol' \ - 'onl*ink:pretend nexthop is directly attached' \ - 'eq*ualize:allow packet by packet randomization' -# route can appear with no "to" -route_add_cmds=("(" $subcmd_route "|" ")" "$reply[@]" "#") - -local -a route_show_cmds -_regex_words route-show-commands "route show command" \ - 'to:select route via prefix:$subcmd_rtselector' \ - 'tos:type of service:$subcmd_tos' \ - 'ta*ble:select table by ID:$subcmd_rttable' \ - 'cl*oned:list only dynamically forked routes' \ - 'ca*ched:list only dynamically forked routes' \ - 'f*rom:select route via source address prefix:$subcmd_rtselector' \ - 'p*rotocol:select routing protocol identifier:$subcmd_rtprotocol' \ - 'sc*ope:select scope of destinations:$subcmd_scope' \ - 'ty*pe:route type:$subcmd_rttype' \ - 'dev:select device:$subcmd_dev' \ - 'v*ia:select nexthop router:$subcmd_ipaddr' \ - 'sr*c:select route via source prefix:$subcmd_ipaddr' \ - 'realm:select routing realm:$subcmd_rtrealm' \ - 'realms:select from/to routing realms:$subcmd_rtrealms' -# route selector can appear with no "to" -route_show_cmds=("(" $subcmd_rtselector "|" ")" "$reply[@]" "#") - -local -a route_get_cmds -_regex_words route-get-commands "route get commands" \ - 'to:route destination:$subcmd_ipaddr' \ - 'f*rom:route source:$subcmd_ipaddr' \ - 'tos:select type of service:$subcmd_tos' \ - 'ds*field:type of service:$subcmd_tos' \ - 'iif:select input interface (device):$subcmd_dev' \ - 'oif:select output interface (device):$subcmd_dev' \ - 'c*onnected:use preferred address as source' -route_get_cmds=("(" $subcmd_ipaddr "|" ")" "$reply[@]" "#") - -local -a route_cmds -_regex_words \ - route-commands "route command" \ - 'h*elp:show help for command' \ - 'a*dd:add new network route:$route_add_cmds' \ - 'c*hange:change existing network route:$route_add_cmds' \ - 'r*eplace:add or change network route:$route_add_cmds' \ - 'd*elete:delete network route:$route_add_cmds' \ - 's*how:list network routes:$route_show_cmds' \ - 'f*lush:flush network routes:$route_show_cmds' \ - 'g*et:get a single network route:$route_get_cmds' -route_cmds=("$reply[@]") - - -# -# rule -# -local -a rule_add_cmds -_regex_words rule-add-commands 'ip rule add/delete commands' \ - 'ty*xpe:type of rule:$subcmd_ruletypes' \ - 'fr*om:select source prefix:$subcmd_ipaddr' \ - 'to:select destination prefix:$subcmd_ipaddr' \ - 'iif:select input interface (device):$subcmd_dev' \ - 'tos:select type of service:$subcmd_tos' \ - 'ds*field:select type of service:$subcmd_tos' \ - 'fw*mark:select fwmark:$subcmd_string' \ - 'pr*iority:select unique priority for rule:$subcmd_number' \ - 'ta*ble:select routing table by ID:$subcmd_rttable' \ - 're*alms:select from/to routing realms:$subcmd_rtrealms' \ - 'nat:select base of IP block to translate:$subcmd_ipaddr' - -rule_add_cmds=("(" $subcmd_ruletypes "|" ")" "$reply[@]" "#") - -local -a rule_cmds -_regex_words \ - rule-commands "rule command" \ - 'h*elp:show help for command' \ - 'a*dd:insert a new routing rule:$rule_add_cmds' \ - 'd*elete:delete a routing rule:$rule_add_cmds' \ - 'f*lush:flush rules and dump deleted rules' \ - 's*how:list routing rules' -rule_cmds=("$reply[@]") - - -# -# tunnel -# -local -a tunnel_add_cmds -_regex_words tunnel-add-commands 'tunnel add/change/delete commands' \ - 'na*me:select tunnel device name:$subcmd_dev' \ - 'm*ode:select tunnel mode:$subcmd_tunnelmode' \ - 'r*emote:select remote endpoint address:$subcmd_ipaddr' \ - 'l*ocal:select local address:$subcmd_ipaddr' \ - 'ttl:set fixed time to live, 1 to 255 or 0 (inherit):$subcmd_number' \ - 'tos:select type of service:$subcmd_tos' \ - 'ds*field:select type of service:$subcmd_tos' \ - 'dev:select device to bind tunnel to:$subcmd_dev' \ - 'no*pmtudisc:disable path maximum transport unit discovery' \ - 'ik*ey:set input key for GRE tunnel:$subcmd_ipaddr' \ - 'ok*ey:set output key for GRE tunnel:$subcmd_ipaddr' \ - 'k*ey:set bidirectional key for GRE tunnel:$subcmd_ipaddr' \ - 'ic*sum:enable input checksums for GRE tunnel' \ - 'oc*sum:enable output checksums for GRE tunnel' \ - 'c*sum:enable bidirectional checksums for GRE tunnel' \ - 'is*eq:serialize input packets on GRE tunnel' \ - 'os*eq:serialize output packets on GRE tunnel' \ - 's*eq:serialize packets bidirectionally on GRE tunnel' -# name is default... we always complete it as an interface, -# although that's not really right for "add". -tunnel_add_cmds=("$reply[@]" "#") - -local -a tunnel_cmds -_regex_words \ - tunnel-commands "tunnel command" \ - 'h*elp:show help for command' \ - 'a*dd:add a new IP tunnel:$tunnel_add_cmds' \ - 'c*hange:change an existing IP tunnel:$tunnel_add_cmds' \ - 'd*el:destroy an IP tunnel:$tunnel_add_cmds' \ - 's*how:list IP tunnels' -tunnel_cmds=("$reply[@]") - - -# -# maddr -# -local -a maddr_add_cmds -_regex_words maddr-add-commands "maddr add/delete command" \ - 'a*ddress:select link layer (MAC) address:$subcmd_lladdr' \ - 'dev:select device to bind multicast address to:$subcmd_dev' -maddr_add_cmds=("(" $subcmd_ipaddr "|" ")" "$reply[@]" "#") - -local -a maddr_show_cmds -_regex_words maddr-show-commands 'maddr show command' \ - 'dev:select device with multicast address(es):$subcmd_dev' -# device is default argument but if given the "dev" is useless -maddr_show_cmds=("(" $subcmd_dev "|" "$reply[@]" ")") - -local -a maddr_cmds -_regex_words \ - maddr-commands "maddr command" \ - 'h*elp:show help for command' \ - 'a*dd:add multicast address:$maddr_add_cmds' \ - 'd*elete:delete multicast address:$maddr_add_cmds' \ - 's*how:list multicast addresses:$maddr_show_cmds' -maddr_cmds=("$reply[@]") - - -# -# mroute -# -local -a mroute_show_cmds -_regex_words mroute-show-commands "mroute show command" \ - 'to:select destination prefix:$subcmd_ipaddr' \ - 'iif:select input interface (device):$subcmd_dev' \ - 'from:select source prefix:$subcmd_ipaddr' -mroute_show_cmds=("(" $subcmd_ipaddr "|" ")" "$reply[@]") - -local -a mroute_cmds -_regex_words \ - mroute-commands "mroute command" \ - 'h*elp:show help for command' \ - 's*how:list multicast routing cache entries:$mroute_show_cmds' -mroute_cmds=("$reply[@]") - - -# -# monitor -# -local -a monitor_cmds -_regex_words \ - monitor-commands "monitor command" \ - 'h*elp:show help for command' \ - 'all:monitor all changes' \ - 'link:monitor changes to links' \ - 'address:monitor changes to addresses' \ - 'route:monitor changes to routes' \ - 'file:read rtmon-generated log:$subcmd_files' -monitor_cmds=("$reply[@]") - - -# -# Global argument handling -# - -# Arguments to _regex_arguments, built up in array $args. -local -a args reply -args=( - # Command word. Don't care what that is. - /$'[^\0]#\0'/ -) - -# TODO: -# -b*atch <FILENAME> -# -force (for batch mode) -# -l*oops <COUNT> -# -n*etns <NETNS> -# -rc, -rcvbuf<SIZE> -_regex_words options "ip options" \ - '-h*uman:output statistics with human readable values' \ - '-i*ec:print human readable rates in IEC units (ie. 1K = 1024)' \ - '-s*tatistics:output statistics' \ - '-d*etails:output more detailed information' \ - '-c*olor:color output' \ - '-br*ief:brief output' \ - '-a*ll:executes specified command over all objects' \ - '-f*amily:select protocol family:$subcmd_family' \ - '-4:IPv4' \ - '-6:IPv6' \ - '-B:family bridge' \ - '-D:family DECnet' \ - '-I:family IPX' \ - '-M:family MPLS' \ - '-0:link protocol, no networking' \ - '-o*neline:output one record per line' \ - '-t*imestamp:display current time when using monitor option' \ - '-ts*hort:display current time in shorter format when using monitor option' \ - '-r*esolve:use system resolver for DNS names' -args+=("$reply[@]" "#") - -_regex_words \ - commands "ip command" \ - 'l*ink:configure network device:$link_cmds' \ - 'addrlabel:manage addrlabel:$addrlabel_cmds' \ - 'a*ddr:manage protocol address:$addr_cmds' \ - 'r*oute:manage routing table:$route_cmds' \ - 'ru*le:manage routing policy database:$rule_cmds' \ - 'n*eigh:manage neighbour/ARP tables:$neigh_cmds' \ - 't*unnel:configure tunnel:$tunnel_cmds' \ - 'm*addr:manage multicast addresses:$maddr_cmds' \ - 'mr*oute:manage multicast routing cache:$mroute_cmds' \ - 'mo*nitor:monitor state:$monitor_cmds' -args+=("$reply[@]") - -_regex_arguments _ip "${args[@]}" - -_ip "$@" |