wayland/configure.ac, branch 1.12.93

configure.ac: bump to version 1.12.93 for the RC1 release

2017-02-14T20:56:55Z

configure.ac: bump to version 1.12.92 for the beta release

2017-02-07T23:14:56Z

configure.ac: bump to version 1.12.91 for the alpha release

2017-01-25T02:13:26Z

configure.ac: bump version to 1.12.90 for open development

2016-09-22T17:31:53Z

Signed-off-by: Bryce Harrington

configure.ac: bump to version 1.12.0 for the official release

2016-09-20T17:45:10Z

configure.ac: bump to version 1.11.94 for the RC2 release

2016-09-13T19:13:57Z

configure.ac: bump to version 1.11.93 for the RC1 release

2016-09-06T21:22:03Z

configure.ac: bump to version 1.11.92 for the beta release

2016-08-30T18:40:23Z

configure.ac: bump to version 1.11.91 for the alpha release

2016-08-16T18:25:12Z

configure.ac: bump version to 1.11.90 for open development

2016-06-01T08:08:02Z

As announced in 1.11.0 release notes, master is open again. Signed-off-by: Pekka Paalanen

configure.ac: bump to version 1.11.0 for the official release

2016-06-01T00:11:20Z

configure.ac: bump to version 1.10.93 for the RC1 release

2016-05-24T19:29:59Z

configure.ac: bump to version 1.10.92 for the beta release

2016-05-18T05:07:48Z

configure.ac: bump to version 1.10.91 for the alpha release

2016-05-04T00:56:22Z

build: fix ./configure --disable-dtd-validation

2016-02-29T23:32:35Z

When configured with --disable-dtd-validation: CPPAS src/dtddata.o src/dtddata.S: Assembler messages: src/dtddata.S:39: Error: file not found: src/wayland.dtd.embed Makefile:1520: recipe for target 'src/dtddata.o' failed This is because the variable name used does not match the implicit variable name in autoconf. Fix the variable name, making both --disable-dtd-validation and --enable-dtd-validation to what they should. Do not try to build dtddata.S if dtd-validation is disabled. It depends on wayland.dtd.embed which is created by configure only if dtd-validation is enabled. If not building dtddata.S, also make sure the extern definitions in scanner.c are compiled out. Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=575212 Reported-by: leio@gentoo.org Signed-off-by: Pekka Paalanen Reviewed-by: Quentin Glidic Tested-by: Bryce Harrington

build: Add an --enable-fatal-warnings configure option

2016-02-17T06:13:51Z

New --enable-fatal-warnings ./configure option that just adds -Werror to GCC_CFLAGS Signed-off-by: Derek Foreman Reviewed-by: Bryce Harrington

configure.ac: bump to version 1.10.90 for open development

2016-02-17T01:15:26Z

Master is open for new feature development again.

configure.ac: bump to version 1.10.0 for the official release

2016-02-16T20:03:40Z

configure.ac: bump to version 1.9.93 for the RC1 release

2016-02-09T21:26:21Z

configure.ac: bump to version 1.9.92 for the beta release

2016-02-02T23:30:36Z

configure.ac: re-bump to version 1.9.91 for the alpha release

2016-01-19T22:54:32Z

configure.ac: bump to version 1.9.91 for the alpha release

2016-01-19T22:30:33Z

Validate the protocol xml during scanning

2015-11-17T12:36:21Z

Embed the wayland.dtd protocol data into the scanner binary so we can validate external protocol files without requiring makefile changes. Hat-tip to Pekka Paalanen for the embedding trick. The embedding trick doesn't work well if the to-be-embedded file is in a different location than the source file, so copy/link it during configure and then build it in from the local directory. The current expat parser is not a validating parser, moving scanner.c to another parser has the risk of breaking compatibility. This patch adds libxml2 as extra (optional) dependency, but that also requires parsing the input twice. If the protocol fails validation a warning is printed but no error is returned otherwise. Signed-off-by: Peter Hutterer Reviewed-by: Pekka Paalanen

configure.ac: bump to version 1.9.90 for open development

2015-09-22T20:39:44Z

Master is open for new feature development again. Signed-off-by: Bryce Harrington

configure.ac: bump to version 1.9.0 for the official release

2015-09-21T23:52:11Z

configure.ac: bump to version 1.8.93 for the RC1 release

2015-09-16T03:16:37Z

configure.ac: bump to version 1.8.92 for the beta release

2015-09-01T23:51:30Z

configure.ac: bump to version 1.8.91 for the alpha release

2015-08-16T20:54:50Z

build: always build wayland-scanner

2015-07-17T11:19:08Z

The previous idiom for building a cross-compiled Wayland is to build once for the build host (with --enable-scanner --disable-libraries) to get a wayland-scanner binary that can then be used in a cross-compile (with --disable-scanner). The problem with this is that the cross wayland is missing a wayland-scanner binary, which means you then can't do any Wayland development on the target. Instead, always build wayland-scanner for the target and change --enable/disable-scanner to --with/without-host-scanner. Normal builds use the default of --without-host-scanner and run the wayland-scanner it just built, and cross-compiled builds pass --with-host-scanner to use a previously built host scanner but still get a wayland-scanner to install. (a theoretically neater solution would be to build two scanners if required (one to run and one to install), but automake makes this overly complicated) [daniels: Bikeshedded naming with Ross's OK.] Signed-off-by: Ross Burton Reviewed-by: Daniel Stone

build: Don't depend on libffi unless we're building libraries

2015-06-18T11:06:32Z

When building just the scanner or docs it's not required. This can reduce requirements for a host cross compiling wayland, since only the scanner needs to be built natively. Signed-off-by: Derek Foreman Reviewed-by: Peter Hutterer Reviewed-by: Pekka Paalanen

build: Allow disabling building of wayland libraries

2015-06-18T11:06:16Z

When cross-compiling it may be useful to build only the wayland-scanner natively. This patch makes it possible to disable build of the libraries. Signed-off-by: Derek Foreman Reviewed-by: Peter Hutterer Reviewed-by: Pekka Paalanen

configure.ac: bump version to 1.8.90

2015-06-03T07:12:49Z

Master is open for new features again Signed-off-by: Bryce Harrington

configure.ac: bump to version 1.8.0 for the official release

2015-06-02T23:06:02Z

configure.ac: bump to version 1.7.93 for the RC2 release

2015-05-27T02:10:15Z

configure.ac: bump to version 1.7.92 for the RC1 release

2015-05-16T00:53:29Z

configure.ac: bump to version 1.7.91 for the alpha release

2015-05-07T01:59:59Z

config: use simpler regexp syntax to get dot version

2015-04-07T22:48:25Z

I wasted a lot of time before I figured out that I needed to add those square brackets to get this to work. Sigh... Reviewed-by: Bryce Harrington

configure.ac: bump version to 1.7.90

2015-02-18T02:34:33Z

Master is open for new features again Signed-off-by: Bryce Harrington

configure.ac: bump to version 1.7.0 for release

2015-02-14T03:17:56Z

configure.ac: bump to version 1.6.93 for rc2 release

2015-02-07T01:56:44Z

configure.ac: Fallback to older detection code if pkg-config can't find expat

2015-02-06T23:52:50Z

This paritally reverts commit a4afd90f9f0c27ed5f3f313b915c260673f8be34. On older expat versions (ie the one on Ubuntu 12.04) there is no pkg-config file, so fall back to a test for the header and library. In addition the source for expat does not seem to be in a git repository but in cvs instead and it seems preferrable to not require cvs to build wayland. The restored test has been updated to use AC_SEARCH_LIBS. This version uses empty square brackets for the unused branches, similar to many other if statements in configure.ac. Reviewed-by: Bryce Harrington Reviewed-by: Andrew Oakley

configure.ac: re-bump version to 1.6.92 for rc1 release

2015-01-31T03:08:22Z

configure.ac: bump version to 1.6.92 for rc1 release

2015-01-30T22:57:53Z

configure.ac: use pkg-config to find expat

2015-01-29T05:29:10Z

This is now done in the same way as the libffi dependency and still allows the library to be installed in a non-standard location (with PKG_CONFIG_PATH).

doc: Switch from static image files to generated diagrams.

2015-01-29T01:43:16Z

Switches diagrams from using static PNG images to instead generate them via simple graphviz DOT markup files. Signed-off-by: Jon A. Cruz

tests: C++ compilation test

2015-01-27T11:17:42Z

This test includes one of wayland headers, which produced error with C++ compiler. C compiler can't be used for this test, because it issues only a warning[1] and only when wayland headers are not installed in system headers path (/usr/include). [1] wayland-server-protocol.h:201:2: warning: implicit declaration of function ‘wl_resource_post_event’ [daniels: Merged in Marek's follow-up to check for a C++ compiler.] Signed-off-by: Mariusz Ceier Signed-off-by: Marek Chalupa Reviewed-by: Daniel Stone

configure.ac: bump version to 1.6.91 for the alpha release

2015-01-17T11:39:05Z

doc: Add config check for doxygen 1.6.0+.

2014-12-08T08:07:35Z

Add a config time check for a new enough (1.6.0+) version of doxygen. v2. require 1.6.0+ instead of 1.8.0+ Signed-off-by: Jon A. Cruz Reviewed-by: Pekka Paalanen

doc: replace publican with xmlto

2014-09-22T07:30:41Z

Publican isn't packaged for some distros, xmlto is a lot more common. Most of what publican provides for us is the stylesheet anyway, so we can just use xmlto and the publican stylesheet to get roughly the same look. PDF and XML generation has been dropped, this needs a bit more more effort than a mere switchover to xmlto. The top-level directory structure imposed by publican is kept for now (specifically the Wayland/en-US/html tree). This makes it easier to transition over for packagers. Note that the list of files inside has changed. CSS files are taken from publican to keep a uniform look compared to previous documentations. Stylesheets are licensed under CC0 1.0 Universal license, see publican/LICENSE: 1. Files in the datadir/Common_Content directory and its subdirectories are licensed under the CC0 1.0 Universal license. To the extent possible under law, the developers of Publican waive all copyright and related or neighboring rights to the files contained in the datadir/Common_Content directory and its subdirectories. Acked-by: Pekka Paalanen

configure.ac: bump version to 1.6.90

2014-09-22T06:51:20Z

Master is open for new features again. Signed-off-by: Pekka Paalanen

configure.ac: bump version to 1.6.0

2014-09-19T09:36:04Z

Signed-off-by: Pekka Paalanen

configure.ac: bump version to 1.5.93 for rc2

2014-09-12T09:26:50Z

Signed-off-by: Pekka Paalanen

configure.ac: bump version to 1.5.92 for rc1

2014-09-05T11:57:03Z

Signed-off-by: Pekka Paalanen

configure.ac: Bump version to 1.5.91 for the alpha release

2014-08-22T15:01:35Z

Signed-off-by: Pekka Paalanen

configure: fix publican version detection

2014-07-06T09:39:16Z

Publican now adds a spurious "v" to the version output.

configure.ac: Bump configure.ac version to 1.5.90 on master

2014-05-28T17:11:55Z

configure.ac: Bump version to 1.5.0

2014-05-19T23:24:00Z

configure.ac: Bump version 1.4.93

2014-05-12T19:54:13Z

This is the last RC before 1.5.

configure.ac: Bump version to 1.4.92

2014-05-01T20:44:09Z

configure.ac: Bump version to 1.4.91

2014-04-07T23:08:42Z

build: Move tests/Makefile.am into toplevel Makefile.am

2014-03-07T20:00:06Z

build: Move src/Makefile.am into toplevel Makefile.am

2014-03-07T19:50:59Z

build: Move cursor Makefile.am into toplevel Makefile.am

2014-03-07T07:15:02Z

build: Move protocol/ Makefile.am into toplevel Makefile.am

2014-02-18T22:55:09Z

A small step towards non-recursive build system for wayland too.

build: Stop using xmllint to validate protocol files

2014-02-18T22:52:02Z

Same reason as commit cd31275f28b0a04d2ec5426dc81e875197b47e52 from weston: The scanner needs to be good enough. If it crashes or fails to report invalid input, that needs to get fixed.

configure.ac: Bump version to 1.4

2014-01-24T04:50:27Z

configure.ac: Bump version to 1.3.93

2014-01-20T05:58:27Z

This is the release candidate.

configure.ac: Bump version to 1.3.91 for the alpha release

2013-12-17T07:51:12Z

os: use posix_fallocate in creating sharable buffers

2013-12-03T00:18:59Z

If posix_fallocate is available, use it instead of ftruncate. Unlike ftruncate, when posix_fallocate succeeds, it guarantees that you cannot run out of disk space, when later writing to the mmap()'ed file. With posix_fallocate, if os_create_anonymous_file() succeeds, the program cannot get a SIGBUS later from accessing this file via mmap. If there is insufficient disk space, the function fails and errno is set to ENOSPC. This is useful on systems, that limit the available buffer space by having XDG_RUNTIME_DIR on a small tmpfs. Signed-off-by: Pekka Paalanen

protocol: validate the protocol against a dtd

2013-10-25T17:58:06Z

The scanner is not very forgiving if the protocol doesn't match it's expectations and crashes without much of a notice. Thus, validate the protocol against a DTD. Move the protocol subdir forward so we validate first before trying anything else, and install the DTD so we can validate weston's protocols as well.

configure.ac: Bump version to 1.3.90 for the master branch

2013-10-23T16:25:08Z

configure.ac: Bump version to 1.3

2013-10-09T23:20:54Z

configure.ac: Bump version to 1.2.92

2013-10-03T05:14:57Z

configure.ac: Bump version to 1.2.91

2013-09-22T21:12:26Z

configure.ac: Bump version to 1.2.90 for master branch

2013-08-30T22:53:55Z

Bump version to 1.2.0

2013-07-13T05:30:45Z

Bump version to 1.1.91

2013-07-09T23:27:08Z

build: Add wayland-scanner.pc.

2013-07-03T20:38:12Z

To allow user program to include wayland-scanner.m4 in tarball, move the path variables from it into wayland-scanner.pc.

build: Fix warning message on syscall failures

2013-06-14T18:56:43Z

build: Add declaration checks to check for required syscall flags

2013-06-05T03:13:34Z

The required flags are relatively new and some older enterprise distributions do not feature them. https://bugs.freedesktop.org/show_bug.cgi?id=63360

configure.ac: Bump to 1.1.90 to open master for 1.2 work

2013-04-29T20:42:40Z

configure.ac: Bump version to 1.1.0

2013-04-16T00:55:33Z

configure.ac: Fix publican version check

2013-04-03T20:22:44Z

This sure is ugly - we feed output of publican -v into bc to compare against minimum required version, 2.8. That's bad enough, but when publican suddenly report 3.0.0, bc starts complaining... Use sed to filter out 3.0 from the 'version=3.0.0' output from publican instead. Seem a little more robust, but it's just a matter of time before something else breaks this flaky setup. Hey, publican, how about shipping .pc files?

doc: rename "Wayland" to "publican"

2013-04-03T19:44:50Z

This directory was called Wayland during my early tries with publican where the source layout was different and it needed to be set to the same name as the publican output directory. This reason doesn't exist anymore, so re-name it to publican to make it more obvious what's hiding in here. Signed-off-by: Peter Hutterer

configure.ac: Use wayland_version macro in bug url

2013-03-17T17:53:29Z

configure.ac: Update bug URL

2013-02-14T22:00:46Z

configure.ac: Lower git master version to 1.0.90

2013-02-02T15:44:32Z

The idea was to use 1.1.0 for the git master version, so that git master would always be newer than any release or 1.1.x version. This means we have to skip 1.1 as a release, which turns out to be confusing. We can just use version 1.0.90 instead, which lets us call the next release 1.1.0.

man, configure.ac: Only generate man pages if we can do it offline

2012-12-03T14:49:36Z

Instead of relying on downloading the stylesheet from the Internet for generating man pages, only generate them if the stylesheet is available locally. Signed-off-by: Jonas Ådahl

configure.ac: Update version to 1.1.0 during development on git master

2012-11-30T22:19:47Z

This lets dependent components, such as mesa or toolkits use git master instead of any 1.0.x release.

configure.ac: Bump version to 1.0.1

2012-11-19T22:30:07Z

Fix distcheck by adding back protocol/Makefile.am

2012-11-19T22:11:58Z

5909dddc78573774bd3a93c280831a7d18d82994 removed protocol/Makefile.am which meant protocol/wayland.xml no longer got included in the tarball. Add back protocol/Makefile.am and configure.ac bits and add protocol to subdirs in Makefile.am to fix this.

doc: Remove unused css and xslt for the protocol

2012-11-12T18:08:32Z

This was added previously (commit 015c42e1) when we didn't have docbook formatted documentation. Now it became quite useless. Signed-off-by: Tiago Vignatti

configure.ac: Bump version to 1.0.0

2012-10-22T18:55:06Z

configure: Depend on a more strict version of publican

2012-10-19T20:51:38Z

Fix https://bugs.freedesktop.org/show_bug.cgi?id=56101 Signed-off-by: Tiago Vignatti

configure.ac: Bump version to 0.99.0

2012-10-16T00:49:41Z

configure: Make documentation option work in fact

2012-10-15T17:10:08Z

Also, now doxygen is mandatory for building the documentation (looks reasonable because both man-pages and publican will need it). Signed-off-by: Tiago Vignatti

doc: Add auto-generated Wayland Library chapter

2012-10-15T17:02:04Z

For now only Wayland Client API is described on that chapter, which is extracted via doxygen on ./src/wayland-client.h. We apply a stylesheet (doxygen-to-publican) on doxygen output so it becomes docbook valid. Now all we need to do is populate that header while developing in order to grow a decent documentation. So please use it! Signed-off-by: Tiago Vignatti

man: add man-page infrastructure

2012-09-25T15:02:52Z

This adds a man-page infrastructure based on Docbook XML files. This allows us to integrate the man-pages into the publican books later. An example page for wl_display_connect() (with an alias wl_display_connect_to_fd()) is also added. Feel free to add more man-pages. Function calls are put in man3 and overview pages into man7. All pages (including aliases) have to be added to the Makefile. Docbook does generate aliases automatically from the additional names that were put in the XML file. However, a small SED script is needed to fixup the include-paths in the generated troff files. If someone knows how to avoid that (or even install them gzip'ped), please fix it up. Signed-off-by: David Herrmann

Bump version to 0.95.0

2012-07-24T19:45:00Z

cursor: use os_create_anonymous_file()

2012-07-10T18:08:59Z

Copy the implementation of os_create_anonymous_file() here from weston, so we can use it instead of hardcoding a path to /tmp. Signed-off-by: Pekka Paalanen